Browse all practice questions for the North American Electric Reliability Corporation (NERC) Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

North American Electric Reliability Corporation (NERC) Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What is the primary reason for favoring a controlled operation switching strategy during recovery from a blackout in extreme cold weather?
  • How much advance notice should emergency assistance for a capacity deficiency be scheduled by the BA?
  • What role do CT measurements play in the operation of distance relays?
  • In the early stages of a system restoration, why are high transmission voltage issues more prevalent than low voltage issues?
  • When facing an islanded condition, what is the first step you should take?
  • Which action is NOT within the responsibilities of operating authorities to ensure reliable system operation?
  • What factor primarily affects the surge impedance loading (SIL) of a transmission line?
  • In terms of fault response, what is a potential benefit of reducing angle spread?
  • Who should coordinate seasonal planning and operations with the transmission operator?
  • What can be affected if a transmission line exceeds its temperature threshold?
  • If balancing authority A is importing 225 MW while only scheduled to import 200 MW, what does the ACE indicate if frequency is 59.99 Hz?
  • Why are high transmission system voltage problems more likely in the initial stages of system restoration?
  • What action must the Transmission Operator (TOP) perform to relieve an overloaded radial transmission line?
  • If a SPS/RAS system is out of service for maintenance, what action should you take within your balancing area?
  • If a System Protection Scheme (SPS) or Remedial Action Scheme (RAS) is out for maintenance, what should the transmission operator do?
  • How many hours of system restoration training is required for field switching personnel according to regulatory standards?
  • What must all Transmission Operators (TOP) ensure to avoid instability in the power system?
  • If a transmission line is loaded above its System Interaction Limit (SIL), what happens to the voltage?
  • After a disturbance in frequency, what could indicate an automatic governor response?
  • What is the main function of Automatic Generation Control (AGC) in terms of NERC compliance?
  • What is a consequence of a transmission path operating past its long-term limits?
  • What is the primary purpose of an UFLS program?
  • What must each BA agree on with adjacent BAs regarding their Composite Confirmed Interchanges?
  • What is the maximum time a reliability coordinator may take to return the transmission system to within its IROL?
  • What is an example of 'supplementary excitation control' equipment?
  • What does it mean when a line is described as being inductive?
  • If a substation operator receives an operating instruction incorrectly, what should they do?
  • What does ATC stand for in the context of energy transmission?
  • How much will load change per 1% change in frequency?
  • What is typically the first response when a transmission line goes beyond its operating limits?
  • What happens to the voltage profile of a bus with a closed breaker when approaching an open breaker?
  • What does maintaining acceptable voltage levels help avoid in the bulk electric system?
  • Why is the location of transmission reactive resource reserves significant?
  • During low load conditions, what primary system conditions does an operator typically seek to alleviate?
  • In a region experiencing low voltage, what action can a System Operator take to increase the voltage?
  • Which of the following is true regarding lightly loaded transmission lines?
  • Which protective relay is most likely to operate while adjusting the tap changer on a power transformer?
  • What type of relay operates based on the ratio of PT measurements to CT measurements?
  • Which of the following is NOT typically part of load forecasting?
  • What type of stability is described by the ability of a power system to maintain equilibrium after a disturbance?
  • What action can be taken to prevent voltage collapse due to a reactive power deficiency?
  • What is the main purpose of a contingency analysis tool in electric reliability operations?
  • If BA A has multiple import and export schedules, what is the net interaction for BA A?
  • What is the normal ramp duration for an interchange Schedule between the Eastern and TRE Interconnections?
  • What is the main disadvantage of a microwave telecommunication relay station that relies solely on a local AC power source?
  • Under what circumstance is a Tag not required for an Interchange Transaction replacing an unexpected generation loss?
  • In a tight generation and reactive resources condition, which scheduled job should proceed?
  • What is not a basic use of transformers?
  • When the system is nearing a voltage collapse and other remedies are unfeasible, what should operating personnel do?
  • During the initial system restoration process, load pick-ups are recommended to be limited to what percentage of total synchronized generation?
  • Which type of protection relay utilizes current transformers to ensure a balance between current inflow and outflow?
  • What is the short-term thermal limit of the transmission path described?
  • What term describes the limiting value for MW, MVAR, amperes, frequency, or volts to ensure operation within acceptable reliability criteria?
  • How do series capacitors influence the overall system capacity in power transmission?
  • What average percentage decrease in non-motor load magnitude has been indicated for a voltage reduction of 5%?
  • In a high voltage area with off-peak demand, how can voltage be effectively lowered?
  • If frequency, voltage, and phase angle are all too high for breaker closing, what should a system operator consider first?
  • What are the two categories of emergency outlined in NERC Standard EOP-011?
  • What is the submission time for Real-Time Tags for interchange transactions within 1-4 hours from Ramp start time?
  • What should a system operator do if system voltage continues to decline after exhausting all resources?
  • What AGC mode should a BA operating asynchronously switch to?
  • What is one of the basic uses of transformers in electrical systems?
  • What does "DCS" stand for in the context of Balancing Authorities?
  • What happens to the system frequency when significant MW load is suddenly reduced?
  • Under what circumstance is a transmission operator allowed to disconnect from the interconnection?
  • How may inadvertent interchange accumulations be repaid?
  • What is the approximate line charging contribution of a 230kV transmission line that is 100 miles long?
  • In reactive power management, raising VAR output is primarily used for what purpose?
  • The most severe single contingency for a balancing authority area is defined as 850 MW. How much should a disturbance be reported in MW for DCS reporting?
  • The initial response to a frequency deviation is attributed to which of the following?
  • What is the approximate line charging contribution of a 230 kV transmission line that is 100 miles long?
  • If a GDM is predicted to occur tomorrow, which parts of the system are most at risk?
  • According to NERC standards, what is the primary focus of BAs when managing system reliability?
  • Cold load pickup can involve current flows of up to what maximum levels?
  • If your frequency bias is -50 MW/0.1 Hz and a large generator in another BA trips, how should your ACE ideally read?
  • What concept refers to the maximum flow of power that a line can safely handle?
  • Why is it important for Automatic Generation Control (AGC) equipment to be operational during normal conditions?
  • Reactive power reserves are crucial for maintaining what aspect of the power system?
  • If an EEA 3 is declared and a deficient Balancing Authority needs additional ATC, from where could the RC potentially obtain this ATC?
  • If both manually controlled shunt capacitors and automatically controlled generator MVAR are available, which should be used first?
  • How does reducing angle spread contribute to system reliability?
  • Which measure indicates poor voltage stability when operating beyond limits?
  • A 5% reduction in customer voltage typically leads to what level of reduction in load magnitude?
  • If the phase angle at an open breaker is equal to 1/10 of a cycle, what is this same angle expressed in degrees?
  • What is critical for ensuring the stability and reliability of the bulk electric system during operations?
  • If a utility distribution bus has various customer loads totaling 20 MW, what type of load characteristic does this represent?
  • Which factor is most important to consider when energizing transmission lines during power system reconstruction?
  • What is the ramp duration for an interchange Schedule between the Western and TRE Interconnections?
  • What benefit does high-speed transmission protection provide to angle stability?
  • What tool is used to ensure that the power system can respond within acceptable limits for N-1 conditions?
  • Which term describes the transmission path used to connect a black start resource to the next generator?
  • If a transmission line carries 400 MW and 300 MVAR, what is the total MVA?
  • A 1000 MVA rated generator that produces 800 MW and 100 MVAR is best described as?
  • When synchronizing two systems, if the synchroscope is not moving, what should the system operator do first?
  • During system disturbances, why is it important to monitor frequency changes?
  • In the case of low voltage in a portion of an RC, what directive should the RC issue?
  • What type of HVDC system uses two conductors, one with a positive voltage and one with a negative voltage?
  • What type of units will provide the largest adjustments in MW output during frequency disturbances?
  • What does a gradual decrease in frequency and erratic net actual interchange typically indicate in a power system?
  • In the event of an IROL or SOL violation, who is responsible for responding?
  • If alternative communications are unavailable during routine testing, how long does the responsible entity have to repair or designate a replacement?
  • If three transmission lines connect the generation area to the load area and Line 1 trips, can Line 2 violate its operating security limit when 1000 MW is flowing?
  • For real-time tags of interchange transactions less than an hour, when must they be submitted?
  • What effect does having a line loaded below its SIL have on the line voltage?
  • If a load has a power factor of 0.9 lagging and draws 100 MVA, what is the MW draw?
  • Which variable is NOT required to be controlled when synchronizing two islander power systems?
  • Which of the following activities is not part of standard transmission reliability procedures?
  • Which aspect is improved by the reduction of fault duration in high-speed transmission protection?
  • In the case of line trip situations, how does the load flow change across other lines connected to the grid?
  • What is used to help balance a system after it separates from the interconnection during a disturbance?
  • What could indicate that interconnection system loads are higher than on-line generation?
  • What does a system operator need to consider when managing reactive power flow in a transmission system?
  • Why is the acceleration of fault clearance time significant in electrical systems?
  • During what condition should a transmission operator primarily focus on preventing voltage collapse?
  • If a BA's bias setting is -200MW/0.1Hz and NIs changed by +40MW, what is a viable Fs value?
  • What is the immediate action a BA should take when anticipating a capacity shortage?
  • What should operating personnel do when a system is on the verge of a voltage collapse and no other solutions are available?
  • What must operating personnel confirm after issuing burst Operating Instructions?
  • What phenomenon is a geomagnetic disturbance (GMD) most likely to cause?
  • What two methods does NERC recommend for verifying a system's power restoration plan?
  • What requirement does NERC have for the percentage of Contingency Reserve that must be frequency responsive?
  • After a disturbance, what action should a system operator take if re-dispatching generation has no effect on the transmission line?
  • To whom must electric utilities report losses of large amounts of firm system loads?
  • How should a system operator handle a transmission line that is experiencing loading above the operating limit?
  • How does a static VAR compensator function when in automatic mode?
  • A generator experiences a 0.3 Hz drop. If its output increases by 50 MW from 400 MW, what is the % droop of the generator?
  • In a computer simulation showing a 100 MW schedule from Bus A to Bus B, if 63% flows on the scheduled path, what is the distribution factor for the scheduled path?
  • Which device provides the best reactive reserve response during a disturbance?
  • What role does natural capacitance have in power system dynamics?
  • What information must be evaluated by the Source BA and Sink BA for Arranged Interchange?
  • How does the power factor of 0.9 lagging affect the apparent power drawn by a load?
  • What impact does reconnecting disconnected loads too quickly have during system restoration?
  • During initial restoration conditions, what issue is more likely to occur?
  • In the context of BA operations, what is a critical response during a frequency drop?
  • What term describes the value that satisfies the most limiting operating criteria for a system configuration?
  • What characteristic defines the operation of a distance relay?
  • What is the conceptual basis for determining the p.u. voltage level in electrical systems?
  • Which of the following is a key goal of the Capacity Benefit Margin (CBM)?
  • What is an advantage of employing a distance relay in a system?
  • What is one responsibility of a Reliability Sharing Group (RSG) when multiple Balancing Authorities join together?
  • What type of certification must operation personnel have to implement real-time actions for reliable system operation?
  • Which of the following is categorized as a static reactive reserve source?
  • TOP must develop, maintain, and implement formal policies to ensure transmission reliability. Which of the following does NOT need to be addressed in these policies?
  • If two 250 mile long transmission lines are exporting excessive MW and one trips, what is the most likely cause of system collapse?
  • The loading point on a transmission line where MVAR production equals MVAR usage is known as?
  • What effect does a negative ACE have on a Balancing Authority's (BA) CPS1 score when frequency is above schedule?
  • What happens to the voltage phase angle difference when the receiving end load of a transmission line is suddenly increased?
  • If a dynamic schedule is tagged for an average flow of 100 MW, what is the minimum change required for the Tag to be updated?
  • What does MSSC stand for in the context of balancing authorities?
  • A BA changes NIs by +40MW for time error correction. What would their Fs value be if their bias setting is -200MW/0.1Hz?
  • For Real-Time Tags for interchange transactions 4 hours or more from Ramp start time, what is the required submission time?
  • When can dynamic reactive resources be effectively dispatched?
  • Under what condition can low voltage occur without an initiating event?
  • What is the per unit (p.u.) voltage if the actual voltage is 362 kV on a 345 bus?
  • During high-load conditions, what is a common challenge operators must address to maintain reliability?
  • What is one function of the Reliability Coordinator?
  • A reactor rated at 100 MVAR is operating at 90% voltage. How many MVAR is it absorbing from the system?
  • What occurs to the low side voltage of a 345/115 kV auto-transformer if the high side tap is decreased by 5%?
  • Which Balancing Authority is responsible for initiating each Interchange Transaction as tagged?
  • Which statement best describes how reactive power MVAR power normally flows?
  • During operating emergencies, what plan should be in place to manage fuel supplies?
  • How often must a Balancing Authority and Reserve Sharing Group review their probable contingencies?
  • What could happen if an Interconnection Reliability Operating Limit (IROL) is exceeded for longer than the allowable time?
  • Which aspect is crucial for a Transmission Service Provider to consider when selling ATC?
  • The Maximum Sustainable Steady State Capacity (MSSC) for a BA Area is 850 MW. A defined disturbance for DCS reporting is equivalent to how many MWs?
  • Why is the operating reserve capacity important for balancing authorities?
  • What happens to ACE limits if replacement generation is not restored within the allowed time frame following a DCS event?
  • Why is closely monitoring system parameters critical during restoration efforts?
  • What net effect would a generator trip external to a BA have on that BA's operations?
  • What should a system operator do if the line load is approaching its thermal limit?
  • Which factor accounts for the transfer capability reserved by a Load Serving Entity to ensure access to generation for reliability requirements?
  • A decrease in voltage can be expected immediately when which component is taken out of service?
  • If a transmission line has a flow of 400 MW and a thermal limit of 600 MVA, what is the MVA loading on the line if it is within its thermal limits?
  • What is typically necessary for a power system to maintain its stability during peak load conditions?
  • What is one of the outcomes of using high-speed transmission protection?
  • What signifies that interchange transaction information is comprehensive?
  • What is the maximum time for a Transmission Operator to return the system within limits after an IROL violation?
  • If a generator raises its VAR output, what should the system operator expect to happen to system voltage?
  • What could happen if an IROL is allowed to be exceeded for longer than its Tv?
  • What is the approximate MVAR per mile production for a 345kV line?
  • Who is NOT required to receive the complete interchange Transaction Tag?
  • After an Operating Security Limits violation is resolved, which Interchange Transactions should be re-established?
  • What is the MVA limit for a transmission line with a conductor rated at 180 MVA and a rated line side current transformer of 160 MVA?
  • Who has the highest level of authority for the reliable operation of the Bulk Electric System (BES)?
  • Frequency response from AGC systems helps maintain what aspect of system operation?
  • If a generator raises its VAR output, what should the system operator expect the system voltage to do?
  • In a load rejection scheme, what does the term 'load' refer to?
  • If a Balancing Authority (BA) has 500 MW of spinning reserves and 300 MW of that are regulating reserves, what does NERC require for those reserves?
  • Which entity is NOT typically involved in interpersonal communications in the context provided?
  • What should be the first step if a study shows that a single contingency would cause an IROL violation?
  • Under what condition does a Balancing Authority's (BA) Area Control Error (ACE) remain at zero?
  • What is the purpose of transmission reliability policies established by TOP?
  • To minimize a high over voltage at the open end of a transmission line, which type of load is recommended?
  • What is one disadvantage of microwave systems in telecommunications?
  • Which source could be counted as dynamic reactive reserve from a rotating source?
  • What could be a consequence of failing to manage reactive power effectively during restoration?
  • What tool is utilized to ensure the power system can operate within acceptable limits following an N-1 contingency?
  • What types of information must be included in transaction tags?
  • In a power system, the main function of synchronous condensers is to provide what type of power?
  • The responsibility of evaluating reliability impacts during system outages primarily lies with which parties?
  • When the voltage is at 207 kV, how many MVARs does a 230 kV, 50 MVAR capacitor bank provide?
  • In a Balancing Authority, what represents a key responsibility for maintaining system reliability?
  • What is the voltage across the delta winding of a transformer connected to a power system with 199 kV L-G high side voltage?
  • If it becomes necessary to implement voltage reduction during an emergency, which system should be prioritized for the reduction?
  • Which of the following is the best indicator of voltage collapse-prone conditions?
  • What happens when the ratio of PT to CT measurements falls below a certain limit?
  • In an interchange transaction replacing an unexpected generation loss, what is the maximum duration for which a Tag is not required?
  • What does VAR stand for in electrical terms?
  • To comply with operational standards, what is the minimum alteration to a dynamic schedule flow value that triggers a Tag update?
  • What is the main risk associated with ignoring GMD warnings?
  • Can a synchronous machine have a negative torque angle, and what does it indicate?
  • NERC requires balancing authorities to carry sufficient operating reserves to ensure adequate what?
  • According to NERC requirements, what happens if reactive resources are insufficient during a voltage collapse situation?
  • Which two items are typically powered from an emergency power source in a thermal generator?
  • What type of special operation procedure is used to relieve an overloaded transmission path?
  • If the voltage is 207 kV, how many MVAR does a 50 MVAR capacitor bank at 230 kV provide?
  • A transmission line that is loaded above its surge impedance loading (SIL) acts as what?
  • A transmission operator has clear decision-making authority to do what during emergencies?
  • Overlapping regulation service allows a BA to incorporate what into its AGC/ACE equation?
  • How long does it take for a 60Hz voltage wave to complete 1/4 of its cycle?
  • What does Frequency Droop in Hz/Max Generation indicate?
  • During which level of an Energy Emergency Alert is the entity first identified as an Energy Deficient Entity?
  • What is a critical action for transmission operators during sudden changes in system load?
  • For reactive resources to be most effective, where should they be located?
  • Which AGC mode should a BA operating asynchronously switch to?
  • What should a BA's primary objective be during a capacity or energy emergency?
  • All transmission operators shall operate to prevent instability, uncontrolled separation, or cascading outages as a result of which factor?
  • What tool is used to ensure the power system can respond within acceptable limits N-1 conditions?
  • What is the minimum amount of MWs that would trigger an event report to NERC if load is shed to maintain continuity of the BES?
  • Which factor primarily influences the need for reactive power in a power system?
  • What information should be confirmed to ensure accurate transactions between BAs?
  • What is an effect of connecting too much inductive load during system restoration?
  • Upon receiving an alarm for low oil pressure on an underground transmission cable, what is the first step to protect the line?
  • What does NERC stand for?
  • Which of the following aspects are balancing authorities required to monitor according to NERC regulations?
  • During an all-time summer peak load forecast, which scheduled job should proceed given tight generation and reactive resources?
  • Which of the following elements can affect the operational security limits in a power system?
  • What is the net integrated schedule of BA A after a generator in BA B trips and they agree to a cut?
  • What action should be taken when the interconnection frequency drops from 60Hz to 59.94Hz and the BA ACE is zero?
  • What is the function of the CT and PT in a power system?
  • A TOP restoration plan should describe the restoration of the power system up to which point?
  • Which of the following types of data are BA and RC not required to share with one another?
  • When generation or transmission equipment must be removed from service, what must the GOP BA and TOP do?
  • If an 800 MW generator is loaded at 650 MW and can ramp at 5 MW per minute, what is the available spinning reserve on the unit?
  • Which of the following reactive reserve sources falls into the static reactive reserve category?
  • Which resource can provide operating reserves as required by NERC?
  • What must be true about the Composite Confirmed Interchanges between adjacent BAs?
  • If a system frequency runs at 60.02 Hz for two hours, what is the total positive time error that would occur?
  • What should a system operator prioritize to stabilize high voltage in a lightly loaded area?
  • What is a potential consequence of exceeding an Interconnection Reliability Operating Limit (IROL)?
  • What condition is likely to contribute to a potential voltage collapse in a power system?
  • Which Balancing Authority is responsible for implementing each Interchange Transaction as Tagged?
  • What is a common method used to compensate for bilaterally inadvertent interchange?
  • What is the best method for addressing high MVAR and MVA alarms in a 345 kV system during restoration?
  • What is the immediate effect on voltage when a capacitor bank is removed from service?
  • What is the importance of reactive power reserves in the transmission system?
  • When the Source BA and Sink BA assess information for Arranged Interchange, what key element must be included?
  • What would be the best indicator for voltage collapse prone conditions?
  • Which is a key consequence of failing to manage reactive power effectively?
  • If a generator's turbine is spinning the rotor, what type of energy conversion is taking place?
  • For two identically constructed transmission lines, Line A (150 miles) produces more reactive power than Line B (15 miles). What can be inferred about their loading conditions?
  • In the context of NERC regulations, what is required for regulating reserves that are part of spinning reserves?
  • Lightly loaded transmission lines behave essentially like what?
  • When coordinating a scheduled outage for a tie-line substation, which parties must communicate?
  • In the event of SCADA alarms indicating a disturbance, what should the operator consider if one of the lines is above its SOL?
  • When synchronizing two Islands with different frequencies, what is the preferred action?
  • What is the main focus for operators in terms of preventing cascading outages?
  • A dynamic schedule tagged for 25 MW must be updated if the flow changes by what percentage?
  • Which action is most appropriate for a transmission operator when faced with the potential for cascading outages?
  • What is the approximate MVAR/mile for a 345 kV overhead line?
  • Reactive resources are used primarily to maintain what levels in the power system?
  • How is stability typically maintained in a power system?
  • If the initial interconnection time error is zero seconds and experiences four hours of 60.02 Hz followed by three hours of 59.98 Hz, what is the total accumulated time error?
  • If the phase angle at an open breaker is equal to 1/10 of a cycle, what is this equivalent to in degrees?
  • A pseudo-tie is included in which part of a Balancing Authority's tie-line ACE equation?
  • Why is the location of transmission system reactive power reserves important?
  • What must be ensured for the interchange schedules between two BAs?
  • Which voltage level is commonly used to reference the size of reactive power resources?
  • If generator at 180 MW trips off in BA A with a total capacity of 1500 MW, is this a DCS event?
  • In emergency conditions, where should a voltage reduction take place?
  • If line X absorbs 25% of a generator's output, and line X has a transfer limit of 200 MW, what is the maximum output of that generator?
  • Why are pilot relay schemes necessary in the context of transmission line protection?
  • If a generator increases its VAR output, what is the expected effect on system voltage?
  • When facing a voltage collapse situation, what action should operating personnel take first?
  • After selling 500 MW of non-firm ATC from a total of 1000 MW, what amount remains as firm ATC?
  • If the phase voltage in a wye-connected load is 277 V, what is the line-to-line voltage?
  • In the event of heavy loading in area B, what is the best conclusion for the operator regarding potential separation or islanding?
  • What is the expected real power output on the secondary side of a 230/115 kV transformer rated at 100 MVA with 80 MW entering the primary side?
  • What measurement is crucial for a distance relay to function effectively?
  • What is a primary concern addressed by high-speed transmission protection?
  • What is a likely ultimate outcome when reactive resources are inadequate to meet reactive power demand?
  • Which device is primarily designed to assist in damping power system oscillations?
  • Which type of MW load is most affected by an intentional frequency reduction?
  • What will be sold as a non-firm transmission product during EEA2?
  • The best prediction of system load comes from which load forecast tool?
  • What is the primary purpose of reactive resources in an electrical system?
  • In a transaction where BA A sells 100 MW to another BA, how much energy is actually transferred in the first hour if the ramp begins at the top of the hour and lasts 10 minutes?
  • How does high-speed transmission protection affect angle stability during faults?
  • During a switching operation, if you notice a loss indication after opening one end, what should you do?
  • Which entities must coordinate seasonal planning and operations together?
  • What outcome does raising VAR output from a generator typically have on grid stability?
  • What key function does a transmission operator perform during operating emergencies?
  • What may not exceed during the net scheduled transfer between two Balancing Authority areas?
  • What should a system operator do if a major transmission line is out for maintenance and the load is expected to be greater than anticipated?
  • In microwave telecommunications systems, the transmission media primarily used is:
  • When the voltage across the delta winding is calculated from the line to ground voltage, what factor is used?
  • What documentation must operating personnel possess to ensure stable and reliable operation of the Bulk Electric System (BES)?
  • Under what condition would an UFLS load shedding plan be considered ineffective?
  • What is the purpose of including Pseudo-Tie in the balancing authorities tie line bias ACE equation?
  • To whom should damage or destruction of a facility caused by actual suspected human action be reported?
  • With an actual voltage of 362 kV on a 345 kV bus, what is the p.u. voltage?
  • If an IROL is exceeded longer than Tv, what could be the potential result?
  • What is the primary role of a synchroscope during system synchronization?
  • Which component of a coal-fired steam generator creates the rotational force?
  • In a simple power system with three lines, if one line trips while initially loaded at 200 MW, what will the loading on the remaining lines become?
  • When reactive resources are insufficient, what corrective action is required by the Transmission Operator (TOP) to prevent voltage collapse?
  • If a Balancing Authority does not meet the DCS in a given quarter, what type of reserve must be increased for the next quarter?
  • What is the primary function of a series capacitor in a power system?
  • What aspect of electric system reliability does a voltage control device primarily influence?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy